- 11 comment(s)
Medically reviewed by Jakub Odcházel, DiS., Chief Optician, on 25 May 2021. Written by Lentiamo
Anyone who wants to buy contact lensesshould know the parameters. Thesecontact lens parameters can be found in the prescriptionthat your eye doctor (or optometrist) gave you after your eye test.
Please note that the data provided by your eye care practitioner should not be over a year old, as the parameters of the eyes can change with age. Also, it is important to know that contact lens prescriptions and glasses prescriptions are not thesame.
- Contact lens parameters you need to know
- How to determine a contact lens prescription?
- The difference between a contact lens and spectacle prescription
- Additional information on a contact lens package
- Not every contact lens brand suits each patient'sneeds
- Summary
Curvature (BC)
The base curve of a contact lens describes the curvature of the lens in millimetres. It ensures that the lens sits well on the eye. Usually, this parameter is from 8.2 to 9.0. The most common BC is 8.6.
Dioptres / Sphere (D/dpt./S/SPH/PWR)
Sphere refers to the refractive power of the contact lens. The unit of measurement for spherical power is a diopter or D. Generally, the spherical power of a lens is indicated with a plus sign (+) for hyperopia and a minus sign (-) for myopia.
Diameter (DIA)
Diameter describes the diameter (or size) of the lens. Soft contact lenses have a larger diameter (13.00 to 15.00 mm) than hard contact lenses (9.00 to 10.00 mm).
Cylinder (CYL)
The cylinder value is required for the production of contact lenses for astigmatism. It is a negative value that corrects the corneal curvature.
Axis (A/ACH/AXIS/AX)
Axis is needed in astigmatism as a supplement to the cylinder. It describes the exact position of the curvature on the cornea and is given in a range of 0° - 180°. Please note that, from a manufacturer's perspective, 0° degrees are also written as 180°.The number 90 stands for the vertical position of the eye, the number 180 for the horizontal meridian.
Addition (ADD)
ADD is the difference between the dioptric value for distance vision and the dioptric value for near vision. Values up to +1.25 are considered low, up to +2.00 are considered average and up to +3.00 are considered high.
How to read your contact lens prescription
The contact lens values are determined by youroptician or ophthalmologist using various tests and measuring methods. Only with an accurate prescription can you buy the right lenses. Please note thatall parameters are checked for accuracy every 6–12 months. Your eyesight can change throughout your life, so fitting is important. If you feel that your vision has changed, you should have your contact lens values checked immediately.
The difference between contact lens prescriptions and glasses prescriptions
Glasses lenses are worn about 12 millimetres in front of the cornea, while contact lenses are placed directly on the surface of the eye. If you wear both, you may need (depending on PWR) to have two different prescriptions so that you enjoy perfect vision whether you're wearing your lenses or glasses.
When ordering lenses or glasses online, be careful not to mix up the prescriptions. Also, the method of measurement for glasses and contact lenses differs slightly, as the distance between the eyes must be measured for the glasses prescription.
What additional information is on the contact lens packaging?
In addition to your eyes' essential values, you will find the water content on the packageof your contact lenses, as well as the oxygen permeability.
The drier your eyes are, the lower the water content of the contact lens should be. Contact lenses with a high water content draw out water from the eye when worn for a long time, potentially causing dryness.
Pay attention to the right material for you.
Hydrogel contact lenses have a high water content, which evaporates quickly and thus draws a lot of moisture out of the tear film. The result: the eye dries out more quickly. If you have dry eyes, you should therefore opt for silicone hydrogel lenses, as these offer good oxygen permeability and require 20% less water.
The oxygen permeability is indicatedby ''Dk/''. The longer you want to wear your lenses, the more oxygen permeable they should be. If the value is too low, sensitive eyes may experience redness, itching and burning.
Not every brand of contact lenses suits your needs
Just like shoes and clothes, the measurements and composition of contact lenses can vary depending on the manufacturer. Therefore, you may need to readjust your parameters if you change brands. We strongly recommend that you consult your eye care practitioner when you do so.
Summary
Contact lens parameters | Unit of measurement | Abbreviation | More information |
---|---|---|---|
Dioptres | Dioptres | PWR, D, SPH, dpt | from–30.00to +30.00 |
Curvature | Millimetre | BC | from 8.00to10.00 |
Average | Millimetre | DIA | from 13.00to 15.00 |
Cylinder | Cylinder dioptre | CYL, ZYL | from–0.25to–5.75, toric contact lenses |
Cylinder axis | Degrees | A, AX, AXIS | from 0to 180, toric contact lenses |
Addition | Dioptres | ADD | from +1.00to +3.00, multifocal lenses |
Don't miss any important news.
Subscribe to our newsletter!
Comments
-
Alex
Indeed the blog says everything about what an ideal contact lens is supposed to be when it is used with the prescription.
it resembles the reference of the following blog.
https://bit.ly/3JDvBSv
Reply
-
Klára Lentiamo.co.uk
Dear Alex,
Thank you for your comment.
We are glad you like the article. The article works with generally available information, but we did not find any similarity in the attached link.
Have a lovely day.
Reply
-
Alex
same to you and thanks for having time for greeting my reply.
Reply
-
-
-
Hallandale Y.
This blog is helpful.
Reply
-
Gergana-Ekaterina Lentiamo.co.uk
Dear Hallandale,
Thank you for your comment.
We are glad to hear that you have found our content helpful.
Kind Regards.
Reply
-
-
Andrea
Does it matter if you order the wrong high medium or low
Reply
-
Gergana-Ekaterina Lentiamo.co.uk
Hello,
Thank you for your comment.
We would suggest changing the product in case that a wrong addition has been selected as it directly corresponds to the successful correction of the sight.
Kind Regards.
Reply
-
-
Ron
Hi
If the vertical lines is blurry when you look at letters or numbers, what axis should the lens have?
B
Reply
-
Gergana-Ekaterina Lentiamo.co.uk
Hello,
Thank you for your comment.
Please contact your eye specialist so you can determine the exact axis that you require.
Kind Regards.
Reply
-
-
Brown
Hello, you are awesome! keep going!
Reply
-
Gergana-Ekaterina Lentiamo.co.uk
Hello,
Thank you for your kind words.
Have a lovely day!
Reply
-
Next 4 comments
Best selling products
-
Recommended
£24.19
in stock
-
DAILIES AquaComfort Plus (180 lenses)
£93.98£87.90in stock
-
£55.89
in stock
-
Recommended
£12.49
in stock
-
Lenjoy 1 Day Comfort (90 lenses) Recommended
£45.57£37.69in stock
-
DAILIES AquaComfort Plus (90 lenses)
£46.99
in stock